The Micro Pop™ is a non-rotating pop-up
riser that operates in low volume and low
pressure applications. The Micro Pop™ is
available in four models and accepts all
Spray, Jet, Sprinkler, and Spinner Nozzles
with a 10-32 threaded base. Models are
available in 9” and 6” spring-loaded pop-up
risers and fully extend at a minimum operating pressure of 20 PSI. Models PMP2 and PMP3 are equipped with a stake end and a 1/4” barb inlet to connect to .170 I.D. tubing. Models PMP4 and PMP5 have a 1/2” MPT inlet to connect directly into a 1/2” FPT fitting.




 
 


Operating pressures from a minimum of 20 PSI to a maximum of 45 PSI.
Non-rotating riser to ensure constant direction of spray.
Accepts a wide variety of Spray Jet Nozzles with 10-32 threaded
base.
Models PMP2 & PMP3 attach easily to any drip system using .170 I.D. tubing between the drip hose and the inlet of the pop-up riser.
A 1/4” barbed inlet is located on the anchor arrow at the base of the pop-up riser to make installation easier.
Models PMP4 & PMP5 use a 1/2” MPT thread to screw directly into a 1/2” FPT fitting.
Maximum flow is rated at 30 GPH or 1/2 GPM.
Pop-up has a 302 stainless steel spring for corrosion resistance,
positive retraction and long life.
Body constructed from sunlight-resistant UV protected material of
polyethlene, acetal, and vinyl

     
Download this Product Sheet as a printable .PDF file. (347k)